11-28-2018, 04:23 PM
We are working on a jobsite where the general contractor is gutting the entire suite in a 3 story commercial building. The superintendent knows I do wood working and called me and told me to come help myself to the raised paneling, fluted casings, chair rail moldings, door casing, shelving and baseboard trim before they start tearing everything out and throwing it into dumpsters. 2 hours later I ended up with a truck bed full of this stuff but I'm not sure what type of wood it is.
I wet this piece down with water and took some pictures. I also sanded the surface to see if stain was applied to the back side of the trim board and there wasn't any on there so this is the natural color.
Any help is appreciated.
[attachment=14646]
[attachment=14647]
I wet this piece down with water and took some pictures. I also sanded the surface to see if stain was applied to the back side of the trim board and there wasn't any on there so this is the natural color.
Any help is appreciated.
[attachment=14646]
[attachment=14647]