12-27-2018, 08:49 PM
All prices are shipped. I can take Paypal.
Grizzly H2876Z - 3-1/8" Spiral Cutterhead - $100
USED. it was pretty beat up when I bought it. I cleaned it up and rotated the cutters. All the cutters have at least one good edge. I have tried it on my shaper and it leaves a nice edge.
Diameter: 4"
Bore: 1-1/4"
Height: 3-1/8"
Max speed: 11,000 RPM
Inserts: 33
http://www.grizzly.com/products/Grizzly-...ead/H2876Z
Amana Tool 61220 Insert Carbide 2-Wing Profile Pro 100mm D x 40mm CH x 1-1/4 Bore Steel Shaper Cutterhead - $90
head was used once but knives are new
https://www.toolstoday.com/v-7639-61220....gKz3_D_BwE
Infinity Rabbeting Shaper Cutter 83-076, 3/4" bore, 2-5/8" dia, 2" tall - $45
Used with rub collar. no chips on carbide edges
https://www.infinitytools.com/rabbeting-...tters-6774
Grizzly H2876Z - 3-1/8" Spiral Cutterhead - $100
USED. it was pretty beat up when I bought it. I cleaned it up and rotated the cutters. All the cutters have at least one good edge. I have tried it on my shaper and it leaves a nice edge.
Diameter: 4"
Bore: 1-1/4"
Height: 3-1/8"
Max speed: 11,000 RPM
Inserts: 33
http://www.grizzly.com/products/Grizzly-...ead/H2876Z
Amana Tool 61220 Insert Carbide 2-Wing Profile Pro 100mm D x 40mm CH x 1-1/4 Bore Steel Shaper Cutterhead - $90
head was used once but knives are new
https://www.toolstoday.com/v-7639-61220....gKz3_D_BwE
Infinity Rabbeting Shaper Cutter 83-076, 3/4" bore, 2-5/8" dia, 2" tall - $45
Used with rub collar. no chips on carbide edges
https://www.infinitytools.com/rabbeting-...tters-6774
"There is no such thing as stupid questions, just stupid people"