Posts: 13,412
Threads: 4
Joined: Jun 2007
Location: New Jersey
(02-11-2019, 03:45 PM)Arlin Eastman Wrote: on what tpi they were??
I know awhile back guys were looking to re-tap threads inside the beds and die the threads on the nuts and would like the tap and die to do this.
Everything you wanted to know about Stanley threading..... attached Part 1
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 3,017
Threads: 1
Joined: Aug 2009
Thanks, Admiral! Those two were worth printing out for later review.
Posts: 256
Threads: 0
Joined: Feb 2011
Thanks Admiral. Great resources. Downloaded and saved.
If you continue to cut corners, you'll end up going in circles!
It's my thumb so I'll hit it if I want to!
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Thank you Rich
So I got some of this info
"However, each plane also has two simple studs; one securing the front knob and the other fixing the handle. As parts go these studs have nil intellectual property value, are very simple to manufacture and feature wide tolerances."
On the first one it mentioned the studs are either 12-20 or 1/4/20 and wondering which is which for the years?
So which one is for the steel bodies?
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 14,931
Threads: 0
Joined: Sep 2004
Location: Butler, PA
Thanks for the links to those articles, Admiral. That was very interesting reading.
If you are going down a river at 2 mph and your canoe loses a wheel, how much pancake mix would you need to shingle your roof?
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
02-13-2019, 12:18 AM
(This post was last modified: 02-13-2019, 12:21 AM by Arlin Eastman.)
Rich
So which one is used for the steel bodies 12-20 or 1/4-20??? Or is it both of them???
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 4,006
Threads: 0
Joined: Nov 2010
The 12-20 would be the OEM on the Stanley....1/4-20 usually means someone had to repair the parts....or, it may mean you have bolts from Millers Falls...
Show me a picture, I'll build a project from that
