Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Been a long time, don't remember the steps but it was fairly easy.
Put some new springs in there while yer at it.
Those like to accumulate gunk and wood chips under the roller attachment area (brass block). Need to keep that area cleaned out, or you'll loose some feed roller pressure.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 588
Threads: 0
Joined: Nov 2010
Some of the gears may need to come off. Before you remove anything take pictures of the planet together and as you take each piece off. This way you have a reference when you put it back together.
I tore mine down and replaced the cutterhead bearings, painted it and cleaned it. Its loud but works great.
Don
