I checked the wire gauge going to the receptacles, I checked the breaker. The wire is 12 gauge and the breaker is 20 amp. I have been running my table saw. I have been adding a second 20 amp circuit. I have been putting in 2 gang boxes with circuit A on the left and B on the right. I have also been doubling the number of boxes. Today I get to the final box, the one with the GFCI outlet. There is 12 gauge from the circuit breaker to the outlet, but 14 gauge from this outlet to the next.
Rant over.
Rant over.
I tried not believing. That did not work, so now I just believe