03-15-2019, 10:38 AM
I'm making a new thimble case for the LOML with over 200 spaces in it. I'll be over 2' x 2'.
I was originally thinking of making it with two doors with glass inserts but that would hide the center column of thimbles.
If I elect to go with a single door so all thimbles are visible, what's the best way to hang the case on the wall so it wouldn't tilt when the door is opened and the center of gravity shifts. I don't want to drive screws through the case as I'm considering using a mirror behind the thimbles so drilling through a backing it isn't a great option.
I was originally thinking of making it with two doors with glass inserts but that would hide the center column of thimbles.
If I elect to go with a single door so all thimbles are visible, what's the best way to hang the case on the wall so it wouldn't tilt when the door is opened and the center of gravity shifts. I don't want to drive screws through the case as I'm considering using a mirror behind the thimbles so drilling through a backing it isn't a great option.
Make Frat Boys Great Again