Posts: 2,084
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
Wish I could help but our programmer is an person, he makes excuses as to why certain programs can't be changed. I wish we had a better one, this would be perfect job for us.
Good luck
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 13,485
Threads: 0
Joined: Oct 1999
How many does he want? The programming is child’s play, but sadly, my CNC is too small.
I know a number of folks with bigger CNCs, but they mostly do this as a business.
Posts: 2,084
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
Gotta be a custom millwork shop nearby. Good luck.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 1,618
Threads: 0
Joined: Feb 2010
Location: Coast of Maine
Cian,
This is a total shot in the dark---try
Newfound Woodworks in Bristol, NH. They make cedar strip kayaks, kits and associated stuff. They have a CNC large enough to cut forms for kayaks and rowing boats so may be interested.
g
I've only had one...in dog beers.
"You can see the stars and still not see the light"
The Eagles: Already Gone
Posts: 2,084
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
(03-26-2019, 01:32 AM)Cian Wrote: That was Plan B, and figured I'd ask here first to see if anyone was interested/capable. Thanks, Garry.
No problem. I didn't know if a local shop was going to be less expensive than an online order. Let us know how this turns out, I'm curious.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 180
Threads: 0
Joined: Oct 2004
Here’s another long shot. Here in Chico we have a Community Maker Shop, (not sure what they call themselves) where various crafts share their skills and possibly the tools. I had a potential job that could have used their 4”x8” CNC table. Rent for a month was $75.00. Given Chicago’s size, there has to something like that available for your friend. Goggle up "Makers in Chicago". One of many is SOUTH SIDE HACKERSPACE: CHICAGO.
Or, if your friend has the time and some help from you, show him that his need is mostly circles to cut and holes to drill and a little cutting out for the spokes. Make a template out of ½” MDF. Rough cut the ¾” and wear out a long pattern bit.
Bill
Posts: 923
Threads: 0
Joined: Nov 1999
Location: Williston ND
Even if one does not have a CNC large enough to cut the part they may still be able to produce it if a 25" square can be physically located on the bed of the CNC. Just CNC all the inside details and then use a router and circle jig to cut out the outside.
Proud maker of large quantities of sawdust......oh, and the occasional project!
