Rummage Sale Finds.

[bandit571]

Tis the season, once again...got up into the 70s, yesterday!

3 sales, struck on 2, but the Rummage Sale had a few items..
 
[attachment=17827]

So, what is so interesting in this $2.25 pair of tools?   Screwdriver seems to be an older Stanley, with a square shank in a fluted wood handle..
 
[attachment=17828]
[attachment=17829]
The $2 Hammer is a Brass ball peen...with a lot of lettering stamped in the head...
 
[attachment=17830]
seems a local railroad in the area was known as the C.C.C. & St. L. R.R. ( The Big 4, before New York Central took over..)

Been well used ( or abused
  ).
[attachment=17831]
That be a hole into the ball end...hammer needs a wedge yet, and the clean up/rehab will be done..

[pgriff]

Nice tools. Is that a deep dent or a hole in the hammer?

[bandit571]

That be a hole in the ball end....

[Phil S.]

That be a hole in the ball end....

You have to wonder why.
  Could it be brazed and filed back to shape?

Phil

[TGW]

You have to wonder why.
  Could it be brazed and filed back to shape?

Phil

Could it be some sort of custom hammer that should have a hole in it?
That hole just doesn't look like it got there accidentally.

Otherwise I would use hard welding rod in a stick welder to fill it in with the hammer face (other end of the head) submerged in water. Braze is way too soft.

[AHill]

The hold in the hammer could have been a defect in the casting (if the head were cast brass). I like old vintage hammers. So many custom sizes and uses. and if they were well-taken care of, the patina on the handles just can't be matched.

[Timberwolf]

The hold in the hammer could have been a defect in the casting (if the head were cast brass).  I like old vintage hammers.  So many custom sizes and uses. and if they were well-taken care of, the patina on the handles just can't be matched.

............................
I like hammers and have a couple dozen or so...I guess I am a collector, particularly of small hammers, and I also love the patina that only age can create..I am also a hammer "maker"....I made the jeweler's hammer on the right about 40yrs ago..I used a 3/4" grade eight bolt and an old Atlas metal lathe..I agree with Alan that the "hole" could just be a flaw in the casting. But I'm not sure why anyone would "need" a brass Ball Pein, since the softer brass would be quickly "deformed" in use..unless the "brass" is actually Beryllium copper.  


EDIT...I particularly like the hammer on the left because it is engraved "From George to Eliza, Class of 1903".....

[bandit571]

Unless one of the valves gets a bit sticky...

 [attachment=17872]
And a steel "Engineer's hammer would do more harm than good....

[Timberwolf]

Unless one of the valves gets a bit sticky...

 
And a steel "Engineer's hammer would do more harm than good....

,,,,,,,,,,,,,,,,,,,,,,,,,
Brass hammer yes, but for that you don't need a ball pein..I have brass hammers but none shaped like a rounded ball pein...I don't recall ever seeing one, so it seems to be pretty rare to me...Looks like you have a collectors item

[Stwood_]

Could it be some sort of custom hammer that should have a hole in it?
That hole just doesn't look like it got there accidentally.

Otherwise I would use hard welding rod in a stick welder to fill it in with the hammer face (other end of the head) submerged in water. Braze is way too soft.

Welding a brass hammer head would be near impossible with a stick welder.

,,,,,,,,,,,,,,,,,,,,,,,,,
Brass hammer yes, but for that you don't need a ball pein..I have brass hammers but none shaped like a rounded ball pein...I don't recall ever seeing one, so it seems to be pretty rare to me...Looks like you have a collectors item

I'm thinking brass might be used for other reasons also. To not create sparks around gas/fuel