#5
Photo 
Millers Falls No. 07 skew angle rabbet block plane, excellent except the two little screws holding the removable fence are not correct nor is the screw holding the front nob (I think).  Almost 100% of the nickel and Japaning intact.  Blade has been flattened and honed, but the bevel will need a few passes on the stone.  Some very slight scratches in the sole.  A really nice but slightly imperfect specimen. 

$50.00 plus shipping.  

[attachment=20404]
[attachment=20405]
[attachment=20403]

Ulmia Smoother with wooden wedge.  Needs TLC.  $15.00 plus shipping.  

[attachment=20406][attachment=20407][attachment=20408]
Reply

#6
(09-06-2019, 07:51 PM)gregbois Wrote: Millers Falls No. 07 skew angle rabbet block plane, excellent except the two little screws holding the removable fence are not correct nor is the screw holding the front nob (I think).  Almost 100% of the nickel and Japaning intact.  Blade has been flattened and honed, but the bevel will need a few passes on the stone.  Some very slight scratches in the sole.  A really nice but slightly imperfect specimen. 

$50.00 plus shipping.  





Ulmia Smoother with wooden wedge.  Needs TLC.  $15.00 plus shipping.  

Greg
super nice looking MF 07 ! This is a great buy on this plane!
If I didnt have the LV 140 in brass this would be on its way to montana!
Good luck with your sale
Gordon
Reply
Millers Falls Skew Angle Block Plane & Ulmia Smoother


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.