10-11-2019, 07:14 PM
Is there any reason that something like this would not work?
https://www.mcmaster.com/92395a031
[url=https://www.mcmaster.com/threaded-inserts][/url]
I would epoxy them in. I'm looking for an alternative to the brass screw-in inserts for wood. The wood ones are not designed to screw into end grain so the threads are very large.
https://www.mcmaster.com/92395a031
[url=https://www.mcmaster.com/threaded-inserts][/url]
I would epoxy them in. I'm looking for an alternative to the brass screw-in inserts for wood. The wood ones are not designed to screw into end grain so the threads are very large.