Posts: 1,019
Threads: 0
Joined: Feb 2008
"This is our chance, this our lives, this is our planet we're standing on. Use your choice, use your voice, you can save our tomorrows now." - eV
Posts: 585
Threads: 1
Joined: Apr 2005
(10-30-2019, 10:25 AM)Mike 55 Wrote: Hi all,
As I start my way back into woodworking I need to stock my shop. I've always used square heads screws because they don't slip like the ones at the box stores. I can't remember where I bought them from. I had a computer issue many years ago and lost most of that info. So, what do you use and where do you buy them.
Thanks
Mike
McFeely's
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I still use McFeelys, but be aware it isn't the company of years ago. Graingers bought them out, pretty much raised prices, lower service, and reduced products, then I guess they sold the firm to someone else. It's been a year or so since I bought anything, but at least they had what I wanted (that time) and the screws I got were the same good quality I had received in the past.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I get my shop supplies/screws from Baer Supply. Great selection, German made products which are very good. Wurth brand.
I've had an account there for 20 or so years. Commercial/retail. They cater to businesses, but sell to everyone.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 379
Threads: 0
Joined: Nov 2010
I have used quickscrews.com the last few times and they were great on both price and shipping.
Posts: 7,421
Threads: 1
Joined: Sep 2005
I use star-bits when available. I used to use drywall screws for assembly, but now I use construction screws. Drywall screws are intentionally brittle and the head will snap off if you over-tighten them (presumably leaving the screw below the surface on drywall).
No animals were injured or killed in the production of this post.
Posts: 1,289
Threads: 0
Joined: Sep 2012
Location: Mobile, Alabama
I have had good results using dry wall screws with only an occasional twist-off using a 12v impact driver. A little more caution might be warranted if you are in a situation where a twist-off would be more serious.
I really like the torx head screws. They are readily available locally (without having to order them), they work just as well as the square drive, and they are a bit stronger than the drywall screws.
Posts: 2,274
Threads: 90
Joined: Jun 2001
I go to Ace for most of my screws. A little more than big box stores but they have good selection. I use only square and star heads now. I will not use dry wall screws just because I have broken a few.
John
Always use the right tool for the job.
We need to clean house.
