Posts: 12,614
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I've filled the pores of WO, but never on ebonized oak. Anyway, I just mix a gel stain of a dark color with Pore o' Pack filler, and work it into the grain with a credit card or spatula. Then wipe the excess off. Let it dry overnight and repeat (usually twice for me). I'm thinking this won't show through an ebonized finish unless thit fails to stick to the stain/filler mix. What if you did the ebonizing first, then filled the pores. No idea if that will work, but might be worth a try. I'm sure someone will have a better idea.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 162
Threads: 1
Joined: Sep 2017
After the wood is ebonized, then fill with a contrasting filler,
Posts: 12,926
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(12-31-2019, 10:25 PM)Wild Turkey Wrote: I want to make a couple of pieces using ebonized WO but I want to fill the pores with some colored material that will show through the final coats.
I think I've seen it done but can't remember/find the way it was done.
Anyone know what I'm talking about?
Ceruse (white lead pigment) was the original way of highlighting the pores of white oak. Liming wax is the modern way, but you can't topcoat over wax. You might want to try sealing the wood after the ebonizing process, then using a colored grain filler to fill the pores with whatever color you want, then sealing and topcoating. Sealing the wood after ebonizing should make if easier to completely remove the filler that doesn't go into the pores and keep the ebonized background clean.
FWIW, there are several ways to ebonize wood, but India Ink is about the easiest and most fool proof way of doing it.
John
