Wanted: 90* geared motor NOVA/DC/B-more area

[®smpr_fi_mac®]

I need a geared motor, 1/4 to 1/2 horse, 60-70 rpm output. 110 or 220

[Stwood_]

Ck Ebay for industrial used.
I needed a 60rpm 110v and found a like new ($600.00) for $80.00 shipped that is 3phase. They included a capacitor to drop it to single phase.

[Snipe Hunter]

I might have one. I'll check tonight. 120v

[®smpr_fi_mac®]

STwood--

I've searched eBay but get lost in the listings. There are just *so* many options. I get overwhelmed. Any advice on narrowing it down?

Thanks, Snipe.

[Stwood_]

STwood--

I've searched eBay but get lost in the listings.  There are just *so* many options.  I get overwhelmed.  Any advice on narrowing it down?

Thanks, Snipe.

I'll look around a bit.

[Snipe Hunter]

This motor is in a heavy duty powered canopy. Fwd and Rev wiring. I've never actually even seen the motor itself. The canopy and motor are inside a 12 ft diamond plate aluminum box I used to carry on top of my work van. I knew the guy who designed them and he never cheaped out on anything. I intended to use the motor someday for a drum sander feeder which I'll probably never build. No room. I didn't use it and finally took it off the van a year or so ago. It should work fine. You'll pribably have to figure out the wiring. I cut the cord. Still have the switch box for it I think.

[Snipe Hunter]

Is the chopper done?

[®smpr_fi_mac®]

The chopper runs, but with the new baby this summer, it got pushed aside and I'm waiting on warmer weather to get on it again!

[Snipe Hunter]

Choppers are cool. Babies are cooler.

[®smpr_fi_mac®]

I'm inclined to agree.