Posts: 683
Threads: 0
Joined: Dec 2006
That looks handy! It is on my must-do list. Thanks for posting.
Steve
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
I made one almost like that about 5 years ago but sliding just like a regular sled where it split in the middle. I had uhmw on the bottoms of the sled, I did not care for it and scrapped it since I did not have all the clamps you have.
I think I will have a go at another one and try to find some cheap clamps to use and make my own if I can.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 6,442
Threads: 0
Joined: Feb 2006
It's like a swiss army knife! Great idea
Posts: 262
Threads: 0
Joined: Jan 2020
The tablesaw sled causes the "why did I wait so long" exclamation more than any other simple shop fixture I have encountered. Congrats for finally making your life easier and your work more repeatable/accurate.
When I was young I sought the wisdom of the ages. Now it seems I've found the wiz-dumb of the age-ed.
