04-26-2020, 02:57 PM
I started with some 3/4” ply that's been lying around the shop for 5 years. I cut some kerfs across an 18” strip to bend it 90°. These kerfs go through all but the last ply. This will be a "box" and there is a 3/8” x 1/2” dado to accept a 1/2” ply bottom.
I hit the kerfed ply with boiling water, bent it around with the bottom in its dado, and it is now sitting in clamps.
Does the wood have to be completely dry before I glue it with Elmer's Carpenters Glue Max?
I hit the kerfed ply with boiling water, bent it around with the bottom in its dado, and it is now sitting in clamps.
Does the wood have to be completely dry before I glue it with Elmer's Carpenters Glue Max?
Carolyn
Trip Blog for Twelve Countries: [url=http://www.woodworkingtraveler.wordpress.com[/url]
"It's good to know, but it's better to understand." Auze Jackson
Trip Blog for Twelve Countries: [url=http://www.woodworkingtraveler.wordpress.com[/url]
"It's good to know, but it's better to understand." Auze Jackson