Posts: 7,421
Threads: 1
Joined: Sep 2005
An impact wrench needs about 5cfm at 90 pounds of pressure.
A google search show a fair amount of compressors meeting that requirement, but most are much more expensive.
https://www.google.com/search?client=fir...ent=psy-ab
The Harbor Freight quiet line is the only brand that seems to meet your price requirement.
https://www.google.com/search?client=fir...ent=psy-ab
On the other hand, Craigs list might be a good source for these.
No animals were injured or killed in the production of this post.
Posts: 1,612
Threads: 0
Joined: Oct 2008
Do you want a compressor with it's own engine or something to run off your truck?
For 12V electric air compressors, I would have a Puma or a Viair.
Get a battery powered impact wrench.
And blow guns can be run a much lower pressures than what a compressor will top out at.
Posts: 4,894
Threads: 0
Joined: May 2010
Have you thought about one that runs off the truck engine.
Posts: 2,393
Threads: 0
Joined: Jul 2005
My 2019 Silverado has 110v outlets in the cab & the bed … I just bought one of the little "quiet" HF compressors.
It runs just fine pugged into the truck and works great for the nailers (the truck must be running) … should be able to handle other small air tools …
It is VERY quiet ...
Red
Life is what happens when you're not paying attention.
Posts: 5,263
Threads: 0
Joined: Jul 2004
Location: Bluegrass of KY
Pulled the trigger. I picked up a small Mcgraw hot dog compressor from HF. It had better #s than anything close. It seems to do well. It will keep 90lbs running a blowgun and is not too loud. It is low maintenance and has a much more pleasant tone than the pancakes I have dealt with.
1st class birdhouse builder/scrapwood mfg.