Posts: 10,776
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
IME, pvc is the best bang for the buck.
I did just enough spiral to get down to 6" s&d pvc on mine.
Ed
Posts: 3,390
Threads: 1
Joined: Jan 2002
I just bought the 6” snap lock and fittings from Oneida themselves. I’m sure there were cheaper and/or local options but I ordered it all from my phone on the couch and it showed up in a few days. The extra money was worth it for the convenience. That’s been a few years ago now and I’d do it again.
-Marc
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
06-30-2020, 05:17 AM
(This post was last modified: 06-30-2020, 05:18 AM by fredhargis.)
If you want to move the metal pipes, the snap lock will work just fine, as long as it's heavy enough. Same with HVAC elbows, but both will need to be taped over the seams (foil tape). But for wyes you'll need to look around, or buy from the place you found (I had not heard of them, interesting). Another possibility is
Kencraft...they get good press from time to time and have often been described as a "woodworker's candy store"
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 2,230
Threads: 0
Joined: Sep 2007
Thanks for the suggestions so far. If I go metal is there a minimum gauge I would need. ie I just noticed in the site I listed the connectors are 24 gauge steel. Is that acceptable? I don't remember the cfms of the dc but I know it's a 3hp motor.
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
As I recall, most folks suggest a minimum on 26 gauge, so the 24 should be plenty. Someone will correct me if I got that wrong. I think it was the thin 30 gauge snap lock that was collapsing with the larger DCs
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 9,459
Threads: 0
Joined: Dec 2004
(06-29-2020, 08:08 PM)jussi Wrote: I got a onieda cyclone dc earlier last year am just now getting around to install it and want to upgrade my ducting. Currently using SD pipes and pvc fittings. Thinking I'll want to go with 6" for the main lines and branch off to 4 and 2.5" While I would love to go all out and get nordfab, it simply isn't in my budget. Looking for suggestions on material type and a good source. My first thought was spiral pipes and found this place online. Suggestions?
https://blastgateco.com/Spiral-Pipe-Fittings.php
Come to mid IL and I will hook you up with spiral. I decided to go nordfab and am not going to use the spiral.
You want my recommendation, buy used nordfab!
Glad its my shop I am responsible for - I only have to make me happy.
Posts: 30,415
Threads: 1
Joined: Dec 2002
Location: DuPage County, Illinois, USA
(06-29-2020, 08:08 PM)jussi Wrote: I got a onieda cyclone dc earlier last year am just now getting around to install it and want to upgrade my ducting. Currently using SD pipes and pvc fittings. Thinking I'll want to go with 6" for the main lines and branch off to 4 and 2.5" While I would love to go all out and get nordfab, it simply isn't in my budget. Looking for suggestions on material type and a good source. My first thought was spiral pipes and found this place online. Suggestions?
https://blastgateco.com/Spiral-Pipe-Fittings.php
I just use lightweight S&D 6" PVC from the home center.
Posts: 16,609
Threads: 2
Joined: Oct 1999
07-17-2020, 10:02 PM
(This post was last modified: 08-15-2020, 11:58 AM by Tapper.)
Never been a recorded incident of PVC material causing a dust fire - just saying.
Doug
"A vote is not a valentine. You aren't professing your love for the candidate. It's a chess move for the world you want to live in."
