Could use a little help with this. Everything I see from the NEC and other websites shows a simple installation which, naturally, doesn't match my house.
The antenna and the grounding system are on two opposite sides of the house, which end-to-end is about 40' long. The roof is metal. Any idea how I can run the two grounding wires (from the mast and from the coax) over to the grounding rod?
Here is what I typically see as grounding instructions. My antenna is mounted to the chimney on the opposite side of the house.
![[Image: nec_antenna_grounding.png]](https://longrangesignal.com/wp-content/uploads/2019/04/nec_antenna_grounding.png)
The antenna and the grounding system are on two opposite sides of the house, which end-to-end is about 40' long. The roof is metal. Any idea how I can run the two grounding wires (from the mast and from the coax) over to the grounding rod?
Here is what I typically see as grounding instructions. My antenna is mounted to the chimney on the opposite side of the house.
Mike
I work on the 50-50-90 rule: If there's a 50-50 choice, I'll pick the wrong one 90% of the time!
I work on the 50-50-90 rule: If there's a 50-50 choice, I'll pick the wrong one 90% of the time!
