07-14-2020, 09:58 PM
So the girlfriend has asked for some personalized beds for the cats. First up is the box for Wiskers (aka Cat-and-a-half). She's bigger on boxes than Jake but his is waiting for glueup on the bench.
Once the 2nd box is done I'll apply a few coats of WB poly to keep them clean. And Brenda will be crafting some padding.
The box joints were done with the Shaper Origin in 1/2" BB ply. Still amazed at how accurate it can do them. I specify how much of the fingers I want sticking proud and that's what I get. Likewise I tell it how much to allow for glue and that controls the fit. Pulled out a new spiral bit (a CMT from Menards for the record, maybe $15) and it did a great job. No problems with tearout.
Once the 2nd box is done I'll apply a few coats of WB poly to keep them clean. And Brenda will be crafting some padding.
The box joints were done with the Shaper Origin in 1/2" BB ply. Still amazed at how accurate it can do them. I specify how much of the fingers I want sticking proud and that's what I get. Likewise I tell it how much to allow for glue and that controls the fit. Pulled out a new spiral bit (a CMT from Menards for the record, maybe $15) and it did a great job. No problems with tearout.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin