Posts: 1,998
Threads: 1
Joined: Aug 2016
08-05-2020, 04:14 PM
(This post was last modified: 08-05-2020, 04:16 PM by Roly.)
(08-05-2020, 03:28 PM)Aram Wrote: Long shot, but since GE tech support does not want to answer my email.... My GE fridge came with the house. Plug where the water filter goes. I bought some filters, but cannot remove the plug. Rotated it a quarter turn and it loosens up, but won't come out. I pulled moderately hard. I don't want to force it.
Stuck. Voice of experience would be welcome.
Did you open the filter door all the way ? Mine uses the RPWFE filter and you dont twist it. Open the filter door, pull the plug outward until resistance is felt,gently pull to unseat it. It says do not twist it. If yours uses a different filter the process may be different. Roly
Posts: 8,397
Threads: 1
Joined: Mar 2000
Our GE Profile uses the RPMWF Filter seen in this vid:
RPMWF Filter change
Same outfit also had this vid for the MWF Filter:
MWF Filter Change
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I don't have a GE, but one the ones I have had that plug was purposely hard to remove (I guess), the O-ring is really a snug fit.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 3,757
Threads: 0
Joined: Dec 2005
Ok, let's try this again (photo issues)
On my GE (8 year old french door model) you twist to remove. But it is kinda odd. You twist a bit past a quarter turn and it gets loose. But then you have to keep twisting. It gets stiff again and then drops out. About a half turn total.
You can see the ramp if you take the cover off (my cover you just pull forward). When it is at the halfway/loose point it is right before that exposed ramp at the front.
