Posts: 40,100
Threads: 0
Joined: Apr 2007
Not sure about the name but I would look up deck screws
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 145
Threads: 0
Joined: Mar 2007
09-11-2020, 09:37 PM
(This post was last modified: 09-11-2020, 09:39 PM by woytek.)
The head type could be listed as truss or wafer. Socket drive.
Posts: 14,856
Threads: 10
Joined: Jan 2010
Location: southeastern VA
Cap-Tor (maybe)
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
Posts: 6,678
Threads: 1
Joined: Jan 2003
Location: Southern California
Looks like a pocket hole screw to my non-expert eye. Check McFeeley's
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
Posts: 2,082
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 635
Threads: 0
Joined: Jul 2007
Location: Bridgeport, CT USA
(09-11-2020, 08:39 PM)sroxberg Wrote: It has a very flat head, like a pan head but the top is flat, and very thin. Probably metric because the parts lists calls it a m27-1.5 inches long. The point if flat.
The screw is to hold a slider metal bar on a porch swing into an upright made out of Trex.
https://shopee.com.my/M5-M6-Button-Head-...1695973761
4 or 5 mm hex drive, not that it matters.
Might be a button head screw. Closest I've come is here:
https://shopee.com.my/M5-M6-Button-Head-...1695973761
Posts: 10,718
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
The threads look very similar to those used for particle board or MDF. Closest I can come up with a a truss head deck screw.
Still Learning,
Allan Hill
Posts: 1,590
Threads: 0
Joined: Aug 2009
Location: Manassas, VA
(09-11-2020, 08:39 PM)sroxberg Wrote: It has a very flat head, like a pan head but the top is flat, and very thin. Probably metric because the parts lists calls it a m27-1.5 inches long. The point if flat.
The screw is to hold a slider metal bar on a porch swing into an upright made out of Trex.
Any name so I can source some?
4 or 5 mm hex drive, not that it matters.
https://www.homedepot.com/p/Everbilt-7-m.../204273733
Wafer head socket cap screws, usually called connecting screws. Common in flat pack furniture and outdoor DIY playgrounds.
