▼ 
10-12-2020, 09:26 AM
I’m looking for a Y for my dust collection
I’d like a 6” Y with a 6” on one side and 4” on the other Also want to add some blast gates. Where is the best source for stuff like this these days? Duke ▼ 
10-12-2020, 10:32 AM
(This post was last modified: 10-12-2020, 10:34 AM by fredhargis.)
You want that fitting for metal or PVC? The PVC ones would look like this, and you might find them at a box store (I think Menards has them if you have one of them) or a plumbing supply. Metal ones might look like this, and the ones for HVAC should be at the box store. I suspect for true ductwork fittings you would need a specialty store, and it may not come they you want....I see Kencraft has a 6x6x6, then you could reduce one of the 6s to a 4. One last thing, you can get what's called a "saddle" wye, which is the lateral branch that gets fastened to a piece of pipe.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Rockler makes exactly what you need. Not cheap, however.
https://www.rockler.com/spiral-pipe-and-...0995c27ab3 PVC is much cheaper if you can deal with that. https://www.supplyhouse.com/Spears-P601-...2bbbaad955 ▼
10-12-2020, 03:50 PM
(10-12-2020, 02:42 PM)FS7 Wrote: Rockler makes exactly what you need. Not cheap, however. Wow $82 for the one from rockler, didn’t realize they were gold plated... I found a metal one on amazon for $15, I think I’ll try it. Thank you |
|
Dust collection fittings?
|
|
|
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
