Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
Posts: 18,528
Threads: 0
Joined: Jul 2008
Location: Free At Last!
Do you miss the fact that the Woodpecker table has the short fence that wouldn't hold something vertical? The Wood River one is pretty similar for less price. I know Woodpecker is very good quality.
Posts: 1,565
Threads: 0
Joined: Nov 2005
Location: Mid, MI.
This one looks interesting?
https://youtu.be/oD6TOny1FEw
Posts: 45
Threads: 0
Joined: Jan 2018
I have the same set up as Brad but I have the 36" DP-Pro Fence on order. It's this one
https://www.woodpeck.com/dp-pro-drill-press-table.html
It's taller than the one we both have.
Posts: 233
Threads: 0
Joined: Sep 2011
12-10-2020, 07:09 PM
(This post was last modified: 12-10-2020, 07:59 PM by gordon 131.)
(12-10-2020, 12:01 PM)lincmercguy Wrote: What does everyone like for a midrange drill press table? I thought about building one and using a Rockler fence. However, for the price of the fence, I could buy a whole Wen or MLCS table. I'm mainly looking for a good square fence that can handle some type of stop for repeatability.
If it matters, I have one of the Lowes Porter Cable drill presses.
this one has been on my radar and looks to be a good value? I think you could expand on it and make it fit for you?
MLCS Drill Press Tables
sorry i did not see your mlcs reference, my bad!
Posts: 892
Threads: 0
Joined: Apr 2006
Location: Trout Creek, Montana
Too tall of a fence can be a problem with the feed handles hitting the fence. I built mine with the fence all the way across the table and they interfear on some setups.
Treat others as you want to be treated.
“You only live once, but if you do it right, once is enough.” — Mae West.
24- year cancer survivor
Posts: 22
Threads: 0
Joined: May 2006
Location: NH
You can make your own table.
This is one that I recently made.
[attachment=31553]
Regards,
Phil
Posts: 10,774
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
Nice Radial ram drill.
Ed
Posts: 18,528
Threads: 0
Joined: Jul 2008
Location: Free At Last!
"This is one that I recently made."
Where did you get the fence and associated hardware?
