What is your favorite Miter Gauge?

[dog2bert]

What is your favorite Miter Gauge?

[R Clark]

I like my Incra 1000SE. Have had it for well over 10 years; the only aftermarket miter gauge I've owned.

I still occasionally use the gauge that came with my SawStop. I have a long fence attached to it. I keep the Incra set up for use on the left side if the blade. The OEM gauge is set for use on the right side of the blade.

[richtes]

I'm looking at the Jessem. Have the Jessem router table, lift and fence as well as the wheels on the table saw fence. All are well made.

Have the Kreg but I bent the guide bar when I tripped and need to replace.

Rich

[Handplanesandmore]

I'm looking at the Jessem. Have the Jessem router table, lift and fence as well as the wheels on the table saw fence. All are well made.

Have the Kreg but I bent the guide bar when I tripped and need to replace.

Rich

I don't own one, but I've used the jessem miter gauge several times on a saw belonging to a shop. It's solid and heavy compared to most other miter gauges I've used. There's no play on the flip stop or with the extension bar. Because the fence is aluminum, every time I use it, I double check that nothing of it will contact the shop's sawstop blade.

If you're getting one, use 1/2" thick ply, not 3/4" that's given in the manual, to make the sacrificial fence. The miter gauge owner used 3/4" and found that the stop on the extension has little left to catch the work. Once chewed up, he plans to make a new fence with 1/2" ply.

Like any jessem products, it's pricey, but the quality is there. You get what you pay for. It certainly is not for everyone.

Simon

[Ray Newman]

Wxman and I are on the same page --INRA 1000SE.

[stav]

I use the Incra V27. It was pretty cheap and very accurate. It doesn't have all the detents for even angle but I haven't really used it for much other than 90 degrees.

[®smpr_fi_mac®]

Another vote for the Incra SE1000. I've had it about a decade and love it.

[Timberwolf]

What is your favorite Miter Gauge?

.....................
I have a Incra 1000 and a Woodhaven..both old both excellent..THE Woodhaven is dead nuts on if you want preset indexed angles, but I dont know if they are still in business..

[kurt18947]

Incra 1000 here, plain jane model. I made a fence out of plywood and T Track. One of the things I like about the Incra is that I can have multiple fences if I want them.

[Bill_de]

What is your favorite Miter Gauge?

I've been using the Incra HD with sled. 


Incra Miter Express | Rockler Woodworking and Hardware

--