Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
My experience is very limited with potassium dichromate, but the one time I've seen it used it rendered a very dark change to the wood. It may be more than you want. It is hazardous, so plan accordingly.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 14,947
Threads: 0
Joined: May 2005
Location: Oklahoma
(01-02-2021, 07:57 AM)rwe2156 Wrote: Didn’t know it was hazardous Thx.
Very. Do your research. And don’t think you'll get the color out of anything you spill it on.
Carolyn
Trip Blog for Twelve Countries: [url=http://www.woodworkingtraveler.wordpress.com[/url]
"It's good to know, but it's better to understand." Auze Jackson
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I use the TransTint dyes. I mix it with the clear coat, lightly.
Each coat gives you a gradual darkening.
As usual, use a test piece (scrap) before the real thing.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 20,950
Threads: 0
Joined: May 2005
(01-02-2021, 06:03 AM)rwe2156 Wrote: I’ve got some nice curly but rather light colored cherry I want to darken.
I have dyed cherry but I’m concerned about how curly will react to that. I’ve also used tinted shellac and various oils, but I recently heard about potassium dichromate.
Anyone ever use it or what’s your preference when you don’t want to wait?
I know about the sunlight trick but don’t want curly literally just the figure :-D
The "sunlight trick" works even after the wood is finished. But fuming (ammonia) and lye wipes are often used before.
That said, what you're interested in is not general darkening, but differential uptake by different grain orientations in the wood. Warm up some 75/25 BLO and treat to refusal, remembering to wipe off remaining after 20 minutes. One more 50/50 wipe should be all you need prior to solvent-based final finish.
You want a bit of a preview, wipe with water or alcohol. Won't last, nor be quite as deep, but if it's what you're after, do as above.
Better to follow the leader than the pack. Less to step in.
Posts: 6,107
Threads: 0
Joined: Jan 2006
Location: Central Kentucky
I have used Arm & Hammer Washing Soda to darken cherry in the past. It works but can bring out more browns than reds. It works beautiful with mahogany.
I have also used water based dyes, kind of following the finishes that Glen Huey used. The waterbased dyes did a good job aging the cherry the way I wanted it.
