Posts: 527
Threads: 0
Joined: Feb 2021
Location: Stevi, Montana
Use fasteners
Mill and cut just like lumber
Posts: 887
Threads: 0
Joined: Sep 2009
Location: Carlisle, PA
(03-15-2021, 04:12 PM)Halfathumb Wrote: I've decided I should use PVC baseboards. I'm guessing they get applied with silicone. Is this the way to go?
I used PVC in my bathroom right near my shower where there is some moisture. I milled/routed, sanded and painted it like regular wood and used the same nails I used with the rest of the regular wood baseboard.
Posts: 64,669
Threads: 3
Joined: Feb 2007
Location: Merryland
Any issues with shrinking/movement?
Posts: 27,918
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
(03-15-2021, 04:23 PM)cams2705 Wrote: I used PVC in my bathroom right near my shower where there is some moisture. I milled/routed, sanded and painted it like regular wood and used the same nails I used with the rest of the regular wood baseboard.
Did the same around a shower. Worked beautifully and took paint (I did a light sanding). I used stainless finish screws to attach.
VH07V
Posts: 379
Threads: 0
Joined: Nov 2010
PVC only expands due to temperature and not humidity, sothat shoudn't be a concern unless you have drastic swings (unlikely) in your house.
As for plugging, acrylic or polyurethane caulk, or Cortex plugs work well.
Posts: 27,918
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
I made plugs with a plug cutter from a scrap.
VH07V
