▼ 
06-12-2021, 02:45 PM
Why doe nobody make a drop point blade for utility knives? I carry a folding utility knife around and am always dulling or breaking the very tip. A drop point would work so much better and also make a good marking knife.
Proud maker of large quantities of sawdust......oh, and the occasional project!
▼
06-12-2021, 04:06 PM
Next time you break a tip, you could try grinding the remains into a shape you like better. If it really does work better and you post it here, and others like the idea as well, someone might start manufacturing them. My guess is that nobody at present thinks they would sell.
06-12-2021, 08:07 PM
(06-12-2021, 02:45 PM)KyleD Wrote: Why doe nobody make a drop point blade for utility knives? I carry a folding utility knife around and am always dulling or breaking the very tip. A drop point would work so much better and also make a good marking knife. https://www.amazon.com/Better-Tools-2-No...B000MWWQ9O Not sure, but is this what you are looking for? ▼
06-13-2021, 10:06 AM
(06-12-2021, 08:07 PM)bottd Wrote: https://www.amazon.com/Better-Tools-2-No...B000MWWQ9O That's a hook point. What the OP describes is not a drop point either. I don't know that the type of blade exists for utility knives, but X-Acto makes blades that are curved the way the OP describes. Not suitable for heavy duty work, but definitely for paper and hobby type work.
Still Learning,
Allan Hill
06-13-2021, 07:42 AM
Do i have my blade terminology wrong? I am talking about a knife where the cutting edge at the tip sweeps up a little. It allows one to work with the cutting edge rather than the very tip when working on a horizontal surface..
Proud maker of large quantities of sawdust......oh, and the occasional project!
▼
06-13-2021, 10:00 AM
(06-13-2021, 07:42 AM)KyleD Wrote: Do i have my blade terminology wrong? I am talking about a knife where the cutting edge at the tip sweeps up a little. It allows one to work with the cutting edge rather than the very tip when working on a horizontal surface.. Is this what you are talking about? The curve on the top of a drop-point blade is always convex, which is what distinguishes it from a clip point blade. The drop point is a common design for hunting. Drop point - Wikipedia
See ya later,
Bill 
06-13-2021, 12:42 PM
(06-12-2021, 02:45 PM)KyleD Wrote: Why doe nobody make a drop point blade for utility knives? I carry a folding utility knife around and am always dulling or breaking the very tip. A drop point would work so much better and also make a good marking knife. ....................... am always dulling or breaking the very tip Dulling occurs naturally as the blade is used...no knife is immune to it but some are better than others at holding a satisfactory edge...If you find that your knife dulls too quickly, try sharpening the bevel at a higher angle. It will produce a stronger {but less sharp} edge....Like most things in life..it's a "trade off"...give a little something to gain a little something...I make a lot of knives used for woodcarving and have never found a type of steel that meets every desirable specification...I have come close, but still no cigar!!!   If you are breaking the very tip, you are using the knife the way it was not intended..you need a different tool.. 
Often Tested. Always Faithful. Brothers Forever
Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War Get off my lawn !  
06-17-2021, 11:35 AM
When you don’t get what you want, you get experience!
|
|
drop point utility knife blade
|
|
|
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
