Posts: 863
Threads: 0
Joined: Jan 2007
Location: Fairfax Station, VA
Not knowing anything about your current needs and setup, I vote yes.
Tyler
Posts: 3,057
Threads: 0
Joined: Dec 2006
Location: Concord, NC
Yeah...I don't have a router table... I don't have a ton of space either. I was curious why this cabinet is different then the other orange colored bench dog cabinets.
"Life is too short for bad tools.".-- Pedder 7/22/11
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
It sure seems to me to be worth $125, though it wouldn't be my first choice for a RT (a little small). Even so if it would fit your needs I wouldn't worry about why it looks different.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 4,266
Threads: 0
Joined: Feb 2001
If it comes with a 690 ,I would be careful not to hurt my hand getting my money out.
Tom
Posts: 1,145
Threads: 0
Joined: Feb 2005
Location: Fort Wayne, IN
I had that table for years. It's small but it works. The one thing you need to know is that the plate size is smaller than the normal plate /lift. If you put a lift in it you're restricted to the Rockler/Bench dog lift. That can limit your choices if you decide to upgrade later. If you build your own table down the line it's not a problem. But when I wanted to upgrade to a bigger table from Incremental Tools to make full use of my Incra fence I had to replace the lift as well.
Cliff
‘The problem with the world is that intelligent people are full of doubts, while the stupid ones are full of confidence
Charles Bukowski
Posts: 527
Threads: 0
Joined: Feb 2021
Location: Stevi, Montana
I would buy it just for the 690 router
Posts: 3,057
Threads: 0
Joined: Dec 2006
Location: Concord, NC
Update. I didn't get it. Stupid me thought it was about 45 mins away in a direction I go often. Turned out it was almost 2.5 hrs away. I felt very stupid when I realized that.
"Life is too short for bad tools.".-- Pedder 7/22/11
Posts: 36
Threads: 0
Joined: Nov 2015
I have that exact router table. I like it; used it quite a bit.