Posts: 2,033
Threads: 0
Joined: Jan 2003
I was looking for some "dewaxed shellac" at the end of the summer also at Menards, they were in the process of redoing that section, and it had been eliminated. I also check my local ACE hardware and they didn't carry it either. I like to have it around for special applications, and maybe a project that needs to dry quickly.
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
11-16-2021, 06:19 AM
(This post was last modified: 11-16-2021, 07:44 AM by fredhargis.)
I have a quart of Watco lacquer in my stash from some time ago, and if you were closer I would give it to you. That said, I suspect (or wonder) if the shortage is somewhat related to environmental concerns along with some of the other factors you described. But maybe related to this, I ordered a fiberglass truck cap back in Sept. and was told it would be here in January. The story went (from 2 different vendors) that a Texas fire crippled the fiberglass industry...no idea about how correct it is, but no one could get me a truck cap sooner.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 10,717
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
At least your local area still allows lacquer. Before I moved to Florida, I lived in LA County in Southern California. So many banned products due to air quality that I couldn't get anything with a certain VOC content. No lacquer. No oil-based Waterlox, etc. Fortunately for me, I only had to drive to the next county to get lacquer.
A lot of the raw materials to make shellac come from India. Huge COVID issues in India and getting things shipped from India is a real chore. That, coupled with the port labor shortage is wreaking havoc on the supply chain.
Still Learning,
Allan Hill
Posts: 706
Threads: 0
Joined: Dec 2011
The immediate cause of all these shortages is pandemic related but I think the whole supply chain and manufacturing industry has been playing with fire for a decade or two now with the move to 'lean manufacturing' practices. This is the idea that a company should never have excess capacity or product. For example. would it cost Watco or Sherwin Willimas more money to have a second supplier of materials outside of Texas? Probably, but then they might not be losing money now because they can't get supplies. The whole lean manufacturing ideas just seems like a short-sighted way to get more profits. It will be interesting to see how things shake out as we eventually (fingers crossed) move past this f-ing pandemic.
Posts: 706
Threads: 0
Joined: Dec 2011
(11-16-2021, 11:07 AM)jteneyck Wrote: All we can do is adjust and adapt until things get to whatever the new normal is.
John
Well put. We've gone from the unreasonably fast and cheap shipping expectations that places like Amazon have set, to the opposite end of the spectrum where shipping is expensive and slow. I ordered two pairs of 2in premium hinges today and I had to choose between $15 UPS shipping and $7 USPS. Presuming the retailer isn't gouging me too much to make a profit off the shipping, I think either of those choices is unreasonably high. Throw the darn things in a padded envelop and send them first class, shouldn't cost more than a few bucks.