Greetings fellow WoodNetters! Long time no see!
This is pretty much a PSA that I hope people can find when they are trying to search for the same thing I've been working on.
I've been working on sprucing up this Powermatic planer and I was shocked to find that my Google-fu didn't give me any clear answer about what the best paint match is for this machinery. I know that Powermatic sells rattle can paint that is a match but I felt I could do better than spending $60 to have a can sent to my house. There were claims both good and bad of various "Farm" paints from Rust-Oleum and Krylon that were close (maybe? Nobody posted pictures!) And probably the best advice, just get an oil based enamel color matched. That's what I did, but again no posts with pictures or the color formula! So, here is what I ended up buying, with the color match in case someone out there can't take part of their machine into the store, or it is too far gone to do so:
[attachment=38891]
[attachment=38890]
Some pics before:
[attachment=38885]
[attachment=38886]
And after:
[attachment=38888]
[attachment=38898]
This is pretty much a PSA that I hope people can find when they are trying to search for the same thing I've been working on.
I've been working on sprucing up this Powermatic planer and I was shocked to find that my Google-fu didn't give me any clear answer about what the best paint match is for this machinery. I know that Powermatic sells rattle can paint that is a match but I felt I could do better than spending $60 to have a can sent to my house. There were claims both good and bad of various "Farm" paints from Rust-Oleum and Krylon that were close (maybe? Nobody posted pictures!) And probably the best advice, just get an oil based enamel color matched. That's what I did, but again no posts with pictures or the color formula! So, here is what I ended up buying, with the color match in case someone out there can't take part of their machine into the store, or it is too far gone to do so:
[attachment=38891]
[attachment=38890]
Some pics before:
[attachment=38885]
[attachment=38886]
And after:
[attachment=38888]
[attachment=38898]
