Posts: 1,600
Threads: 0
Joined: Jan 2014
08-04-2022, 04:59 AM
(This post was last modified: 08-04-2022, 04:59 AM by brianwelch.)
Bob Vila recommends using a masonry blade. I have also heard of using a carbide tipped blade, but installing it backwards as is done for cutting vinyl siding...
Good luck
Posts: 31,107
Threads: 2
Joined: Mar 2003
Location: Athens, TN
If you bought it at the big box store, I'd see if they have a matching backsplash that I could buy and experiment with before committing to the counter top. Off hand, I'd guess a fine tooth carbide blade since it is mostly resin.
Rocket Science is more fun when you actually have rockets.
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government." -- Patrick Henry
Posts: 2,078
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
Done this waaaaaaaaay to many times. A regular carbide tipped blade and a belt sander to fine tune it. Very dusty. It's basically the top "gel" coat if you will that's the tough layer. The rest is just filler per say. We do it all of the time. Oh, if you can, cut it upside down, it will chip.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 64,666
Threads: 3
Joined: Feb 2007
Location: Merryland
A diamond blade. Not the ones with the flutes or teeth. The smooth round ones in the tile section at the big box stores. I bought a new one yesterday for cutting 1/2" think porcelain tile. My old one lasted 5 bathrooms and 2 kitchens. Like everything else... they've gone up. I paid about $50 for a 7". There's cheaper ones in the $30 range that should do fine. Just not as much diamonds impregnated in the blade.
Posts: 27,912
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
Success! I used a masonry blade to cut it. Very dusty but no explosions.
Went to Lowes to buy the blade and someone (surprisingly) was at the tool area and asked me if I needed help.
Asked for masonry blades and he took me right to them.
VH07V
Posts: 1,289
Threads: 0
Joined: Sep 2012
Location: Mobile, Alabama
Thanks for the follow-up. That helps everyone.
Posts: 2,078
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
As they say, more than one to do it. I just like hearing from the rest of the Woodnetters which ways don't work. Saves time.
Glad that the OP was able to fix it.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
