Posts: 9,564
Threads: 0
Joined: Jan 2005
Location: Orlando FL
I know I'm generally in the minority in these discussions but I still keep and use my corded stuff over cordless quite a bit. I initially pit on the Dewalt 18 V kit when it came out in the 90's and found the battery was good for about one cut with the circular saw and that was about it. The drill was good and the reciprocating saw was pretty good as well. Not as good as a corded. Over the years, I got better corded stuff cheap on Craigslist as people switched over and now I have a pretty high(-ish) end set of corded stuff cheap. I do use my cordless drill a good bit, but not often, so I usually have to wait for batteries to charge. It's not as easy as plug and play. It does become a pain if you need to work in an area without power, but that is not often for me.
Posts: 10,794
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
Not very often, exceptions are heavy cuts with the Sawzall or circular saw.
Ed
Posts: 16,642
Threads: 2
Joined: Oct 1999
Use my cordless drills/drivers often. Reach for tailed ones occasionally. Was drilling some holes in a 2x top plate for some wiring and my slow speed trusty Dayton did a nice job.
Other tools mostly corded. Bought them some time ago and went for quality. Makes no sense to replace them.
Doug
"A vote is not a valentine. You aren't professing your love for the candidate. It's a chess move for the world you want to live in."
Posts: 1,614
Threads: 0
Joined: Oct 2008
Not as often, but do occasionally still use the corded tools. Main one being the worm drive SkilSaw. If I'm doing a bunch of larger holes, then I'll pull out the corded drill. Still use the corded grinder if it's for a major project.
Posts: 2,213
Threads: 1
Joined: Sep 2003
Location: Maryland
If I think the cordless will do the job, that's the one I take. For handheld tools I do cordless 90% of the time. Batteries have gotten so much better over the last 10 years...
Posts: 12,299
Threads: 0
Joined: Mar 2006
Depends upon the job at hand. Cordless drills and drivers? Pretty much all the time. Circular saw? Maybe 30% cordless. Sawzall? Maybe 5% cordless. Router? About 50 - 50.
Posts: 40,204
Threads: 0
Joined: Apr 2007
09-21-2022, 10:05 PM
(This post was last modified: 09-21-2022, 10:06 PM by Bob10.)
I use corded when I know the job is going to drain batteries quickly. I have a Milwaukie Portaband corded it wasn't cheap to buy and a cordless replacement isn't inexpensive or a tool I would use often enough to justify. I am not sure they have a battery equivalent for a hole hawg or Milwaukee right angle.
Edit to add angle grinder and any saw I am using to cut stone is corded
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 10,794
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
I've not went down the cordless grinder path. Haven't seen a 9" cordless, yet....lol.
Pretty sure nobody makes a 10" circ saw either.
Ed
Posts: 7,011
Threads: 0
Joined: Aug 2004
Location: Perth, Australia
09-22-2022, 06:04 AM
(This post was last modified: 09-22-2022, 06:07 AM by Derek Cohen.)
And if your corded tools are Festool and Mirka (ROS and Orbital sanders, tracksaw, drills) and Elu (routers) .... would you not want to use them?
Regards from Perth
Derek
