▼
Posts: 4,027
Threads: 0
Joined: Nov 2010
Day #4 of the "Cold from Hell"....has added a powerful, hurtful sneeze..to go along with all the other symptoms...will just have to ride this one out....
Plan after I feel better? Make a slipper storage thingy...to house all of the Boss' slippers...
Step One: Hauled a 1 x 6 x 5'6" Ash plank to the shop....intend to cut it in half, rotate the pieces to glue up into a panel....and go from there...
Stay tuned....Cuppa Irish Black Tea, with a few shots of Ryan's Irish Cream....for me sore throat, of course...
Show me a picture, I'll build a project from that
▼
Posts: 10,726
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
Hope your cold isn't a more recent variant of COVID. After getting vaxxed and double boosted, I still ended up with COVID a couple of months ago. In 5 days, it was over, but it did start out like a bad cold. Everyone's symptoms seem to vary. I had to quarantine from work for a week. My wife wouldn't even sleep in the same bedroom or touch me for 2 weeks, for fear she'd catch it.
Still Learning,
Allan Hill
Posts: 2,037
Threads: 0
Joined: Jan 2003
My Covid also acted like the "cold from hell". I was sure it was a cold until my family insisted I test. My eyes felt like they were going to pop out of the sockets. I did get a set of pills because I also have a minor case of asthma. I have had a terrible cough for probably 3 weeks afterwords
▼
Posts: 13,416
Threads: 4
Joined: Jun 2007
Location: New Jersey
(11-07-2022, 09:09 PM)toolmiser Wrote: My Covid also acted like the "cold from hell". I was sure it was a cold until my family insisted I test. My eyes felt like they were going to pop out of the sockets. I did get a set of pills because I also have a minor case of asthma. I have had a terrible cough for probably 3 weeks afterwords
Its interesting that ever since I began wearing masks in public (my bride has auto immune issues and is at significant risk and I don't want to be the source of her getting covid), I've not even had a case of the sniffles; this is since March of 2020. Normally, I'd get 3 or 4 colds each year, so there's something to be said for masking up in crowded places. I'm often the only person wearing one; was in the Home Depot and a guy asked me why I was masked given covid was "over" and I explained why and he was cool with that. This will be with us for some time; another interesting fact is that in the regular flue vaccine they still use variants from the 1918 flu pandemic! I kind of think that covid will end up the same way over time.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 2,037
Threads: 0
Joined: Jan 2003
(11-07-2022, 09:09 PM)toolmiser Wrote: My Covid also acted like the "cold from hell". I was sure it was a cold until my family insisted I test. My eyes felt like they were going to pop out of the sockets. I did get a set of pills because I also have a minor case of asthma. I have had a terrible cough for probably 3 weeks afterwords
After more than a month with a bad cough, I got "nagged" into going to the doctor today. I hardly slept last night, there was kind of a rattling in my head when taking a breath. Dr. said my lungs were fine, that I had an upper respiratory issue. Prescribed Prednisone and said that should help. I was coughing up white chunks. Got two doses in me now, hope it works soon.
Posts: 1,131
Threads: 0
Joined: Jun 2004
(11-07-2022, 04:26 PM)bandit571 Wrote: Stay tuned....Cuppa Irish Black Tea, with a few shots of Ryan's Irish Cream....for me sore throat, of course...
I like your doctor!
It's all wood.
Posts: 9,568
Threads: 0
Joined: Jan 2005
Location: Orlando FL
Never had Ryan's but I do like an Irish cream.
I also like Therafluu for bad colds. Not mixed with Irish cream though. Hope you get better soon.
Posts: 4,027
Threads: 0
Joined: Nov 2010
Day #5..not much change....was informed that I had Laundry Detail, this evening..so
[attachment=45078]
Had a 1 x 6 plank in the shop...and I needed to cut it in half, from 56-1/2" of good Ash....and tossed the "split end"....and, with an assist from a wannabee Shop Cat..
[attachment=45079]
Who was very vocal about his dislike of my Tablesaw.....I then tried to book-match the grain..
[attachment=45080]
Came close? Need to joint the edges a bit..
[attachment=45081]
After I had marked a big X to show how these two will glue up...
[attachment=45082]
Stanley No. 8c makes some nice curlies...anyway, got the glue and clamps out..
[attachment=45083]
Let this sit until tomorrow...then clean it up, and lay out a few angled cuts....making a caddy to house all of the Boss' slippers....might need 2 shelves?
Nose is running like a cheap Faucet....drip, drip, drip....and them sneezes are beginning to hurt.....let alone the cough...will see how tomorrow goes along,,,
Show me a picture, I'll build a project from that
Posts: 4,027
Threads: 0
Joined: Nov 2010
Chest cold update....98% gone. just a slight sniffle, and a COPD Cough..
Woodworking update....sides are cut to shape..
[attachment=45149]
With a handle shape milled out..
[attachment=45150]
And drum sanded smooth...
[attachment=45151]
dados laid out...
[attachment=45152]
2 shelves have been milled..
[attachment=45153]
To size...ends cut at a 10 degree front to back tapers....and a dovetail bit in the router table was used...
[attachment=45154]
Bit was then use in a hand-held router to mill the socket for the bottom shelf..
[attachment=45155]
So that a dry fit could be attempted..
[attachment=45156]
Try to work out the socket for the top shelf...as it is a Stopped one.....
Stay tuned...
Show me a picture, I'll build a project from that
Posts: 4,027
Threads: 0
Joined: Nov 2010
Just an up-date, as to how this thing turned out...Front view..
[attachment=45208]
A look around in back..added a strip to keep slippers in place..
[attachment=45209]
Side view,,,,corners were rounded over a bit...
[attachment=45210]
Shelves are level to the floor....and a look for the top..showing how the sides splay out..
[attachment=45211]
Stain is called "Gunstock" by Minwax...and there is also a coat of "Warm" clear gloss Poly...
And a look at where this will be used...
[attachment=45212]
No..I did NOT make that chair....although, I did make everything thing else...wood wise..
I think that will do...Chest Cold is cured...thanks for looking in..
Show me a picture, I'll build a project from that
|
