▼ 
11-30-2022, 01:59 PM
Hi,
I'm looking for a commercial horizontal resaw bandsaw. Excellent customer service is a priority. 12" capacity. Any thoughts? Not sure of budget at this time. Asking for a friend. Seriously. Thanks! ▼
11-30-2022, 03:38 PM
(11-30-2022, 01:59 PM)Mike L B Wrote: Hi, Lennox Woodmaster CT (carbide) or Woodmaster B (bimetal) or Woodmaster C (carbon steel), depending upon how much you want to spend. The best prices and good service is usually to be found at Spectrum Supply. John ▼
11-30-2022, 07:44 PM
(11-30-2022, 04:27 PM)Mike L B Wrote: Thanks, Sorry. OK, there's a guy on SMC who thinks very highly of this one from Grizzly: Link John ▼
12-05-2022, 07:19 AM
(11-30-2022, 07:44 PM)jteneyck Wrote: Sorry. OK, there's a guy on SMC who thinks very highly of this one from Grizzly: Link Grizzly makes the cost barrier to entry on a new one easier at least. I'd sure try on if in the market. With only a 12" requirement did the OP look into a vertical bandsaw setup with a feeder? Minimax/SCMi 24" and feeder? Glad its my shop I am responsible for - I only have to make me happy.
11-30-2022, 04:28 PM
Woodmizer has some interesting units, didn't know they made resaw machines.
I don't know anything about their customer service though. 
11-30-2022, 07:31 PM
Horizontal is the trick - Hitachi used to be *the* unit luthiers went to. I presume you are looking for automated return, pneumatic assist, production oriented. Candidly, I have zero insights to this orientation - but it seems with a little googling that several are of the horizontal mill variety vs. what we would consider bandsaw. One in particular is https://www.wravor.com/wrc-1050-veneer.html in addition to the wood izer that Mike noted.
Probably best to have him check here: https://www.exfactory.com/Browse/cat/RB/...horiz-vert which will offer a reference as to what pros have used and whats popular. Will help narrow down the search and if he’s lucky may even find a deal on there that works.
Every day find time to appreciate life. It is far too short and 'things' happen. RIP Willem
12-05-2022, 08:58 AM
(This post was last modified: 12-05-2022, 08:59 AM by fredhargis.)
Mike, good to see your post....hadn't seen anything from you in a while!
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
12-10-2022, 04:43 PM
Thanks Fred!
I didn't think anyone cared. I haven't been in my shop in a year and mostly just read Off Topic posts. I don't post much down there, I like to stay out of trouble! 
12-11-2022, 07:14 PM
Try Baker or Woodmizer
Possibly you could pick up a used one from the Pallet industry.
Steve
Mo. I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24 The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints WaterlooMark 02/9/2020 |
|
Horizontal Resaw bandsaw
|
|
|
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
