Posts: 619
Threads: 0
Joined: Mar 2005
Wow. 78 views and no responses. I guess I'm not the only one with limited knowledge of heat pumps.
Telling a man he has too many tools,
is like telling a woman she has too many shoes.
Posts: 22,710
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
You don’t need to shop for a heat pump. You need to shop for an installer start making inquiries of friends, family and co workers in your area.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
What Blackhat said is how I did it. I've had 3 in the last 22 years or so, and the right installer makes a big difference. The last 2 I bought (these were all at different houses) were from the same outfit, because I was so impressed by their CS. I would stick with the larger names out there, but first and foremost is a quality installer.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 64,652
Threads: 3
Joined: Feb 2007
Location: Merryland
Terry, like Blackhat said. I can tell you that the cheaper units (Goodman for instance) tend to be louder but they do work. I also am more concerned about the installer than the brand but I would stick with a brand that has a lot of local support. Lennox tends to use a lot of unique parts and that can lead to lead time issues on repair parts.
Posts: 22,710
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
Before choosing a unit you need to ask a bunch of questions. What is the heating load and cooling load of the building? Has that changed recently? Are you running on electric backup a lot for heating? These questions could impact sizing a replacement.
R22 essentially no longer exists. R 410a is going away but slowly. There’s a couple contenders for replacement but no real front runner right now.
If your loads are a close match, nothing wrong with a single stage. 2 stage ok or go to an inverter based system. Efficiency is always paired with high repair costs. I have no idea what minimum SEER ratings are in your area or energy costs.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 769
Threads: 0
Joined: Jan 2007
Location: ATL
01-11-2023, 10:33 AM
(This post was last modified: 01-11-2023, 12:33 PM by Cabinet Monkey.)
Location would be helpful , almost mandatory. How about adding to your profile ?
What might be best in N. Montana won’t be great in So. Florida.
The min. SEER is the sweet spot.
The improvements over the years all get incorp. into the base products. Moving up the food chain really only gets features you may or may not want.