02-16-2023, 03:26 PM
(This post was last modified: 02-16-2023, 03:30 PM by lift mechanic.)
I am about to assemble some dining room chairs, QSWO Mission style. They will match the dining table I built a couple years ago. With all the pieces, I was wondering if using water-soluble aniline dye before glue-up would affect the strength of the glue, Titebond III. All the joints are the wide setting on the domino with oak dominos. After assembly I will use a Watco oil stain then 3 coats of Arm-R-Seal. I would think with a water-soluble dye the glue would not be affected.
Another question, I have 1/2 quart of dye left over from the table, about 3 years old. Does it go bad? Kept in a mason jar in a cabinet at room temperature.
Another question, I have 1/2 quart of dye left over from the table, about 3 years old. Does it go bad? Kept in a mason jar in a cabinet at room temperature.
Treat others as you want to be treated.
“You only live once, but if you do it right, once is enough.” — Mae West.
25- year cancer survivor
“You only live once, but if you do it right, once is enough.” — Mae West.
25- year cancer survivor