Woodnet Forums › › Active › Woodturning v
Trying to help Arlin, might need a favor from a Powermatic 3520B owner

▼
FrankAtl Offline
Random doodad artist
Posts: 3,136
Threads: 0
Joined: Oct 2007
Location: Cumming, GA.
#32
02-07-2023, 09:56 AM
I'm in the process of setting up a new VFD for Arlin Eastman's Powermatic 3520B lathe. Since I have no way to verify the VFD will interface correctly with the controls on the lathe before shipping it to him, I will probably need some help verifying some of the parameters. Is there anyone who owns a 3520B lathe that would be willing to check some of the parameters on their VFD for me? Currently I would like verification on Group 4 parameters but I'll probably have a couple more. If you're not comfortable navigating the keypad on the lathe I will be able to help you.

I'm still working through the details but should have a complete list of what I need in a day or so.

Thanks!
Frank
Find
Reply
▼
hairy Offline
Honored Veteran who Shoe horned a win
Posts: 771
Threads: 0
Joined: Jan 2011
Location: Cincinnati
#33
02-07-2023, 01:18 PM
(02-07-2023, 09:56 AM)FrankAtl Wrote: I'm in the process of setting up a new VFD for Arlin Eastman's Powermatic 3520B lathe. Since I have no way to verify the VFD will interface correctly with the controls on the lathe before shipping it to him, I will probably need some help verifying some of the parameters. Is there anyone who owns a 3520B lathe that would be willing to check some of the parameters on their VFD for me? Currently I would like verification on Group 4 parameters but I'll probably have a couple more. If you're not comfortable navigating the keypad on the lathe I will be able to help you.

I'm still working through the details but should have a complete list of what I need in a day or so.

Thanks!
Frank

I can't help you, but you're doing a good thing.
Find
Reply
Arlin Eastman Offline
Honored Veteran Brnz Md w/ValorPrplHrtx2
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
#34
02-07-2023, 03:32 PM
One thing Frank is if all the wireing will match.  I am really dumb and know I can not figure it out so a local guy will have to so he would have to know what he is looking for.  hope I am saying it right
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Find
Reply
▼
FrankAtl Offline
Random doodad artist
Posts: 3,136
Threads: 0
Joined: Oct 2007
Location: Cumming, GA.
#35
02-07-2023, 04:54 PM
(02-07-2023, 03:32 PM)Arlin Eastman Wrote: One thing Frank is if all the wireing will match.  I am really dumb and know I can not figure it out so a local guy will have to so he would have to know what he is looking for.  hope I am saying it right

Arlin, I'm drawing up a connection diagram for you using the wiring diagram in the PM3520B manual so I'll be able to include the wire colors as well as the terminal each one connects to. I got a little tied up with my day job the last couple of days but I hope to have the wiring documentation complete by tomorrow.

imapseudonym has offered (thanks buddy) to help me verify a few parameters I'll need to program the new drive so I'm hoping it will be a "plug-and-play deal"...famous last words but I'm hopeful! 
Laugh
Find
Reply
Arlin Eastman Offline
Honored Veteran Brnz Md w/ValorPrplHrtx2
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
#36
02-09-2023, 12:03 PM
imapseudonym  Thanks for the help!
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Find
Reply
shoottmx Offline
Huey gunship door gunner-'68
Posts: 1,618
Threads: 0
Joined: Feb 2010
Location: Coast of Maine
#37
02-10-2023, 08:26 AM
Here's a YouTube that may help---

https://www.youtube.com/watch?v=bETq-OLSC4g

Gary
I've only had one...in dog beers.

"You can see the stars and still not see the light"
The Eagles: Already Gone
Website Find
Reply
▼
FrankAtl Offline
Random doodad artist
Posts: 3,136
Threads: 0
Joined: Oct 2007
Location: Cumming, GA.
#38
02-10-2023, 01:05 PM
(02-10-2023, 08:26 AM)shoottmx Wrote: Here's a YouTube that may help---

https://www.youtube.com/watch?v=bETq-OLSC4g

Gary

Thanks Gary, I think this will be very helpful. I was having trouble following some of the wire colors using the manual and he shows them very clearly in the video. 

I appreciate all you guys helping me on this. I injured my hand a couple of weeks ago and found out yesterday that I need surgery. The surgery is this coming Monday so it may delay me finishing this for a week or so but I'm hopeful it will work. I just have to make sure I get everything correct since I don't have access to the lathe.

Frank
Find
Reply
Cian Offline
Maxed out Honored Member
Posts: 30,416
Threads: 1
Joined: Dec 2002
Location: DuPage County, Illinois, USA
#39
02-10-2023, 11:41 AM
As a sidebar, it blows my mind how much these full size PM lathes cost nowadays. Yowza.
The Neanderthal Index and The Power Index
Website Find
Reply
shoottmx Offline
Huey gunship door gunner-'68
Posts: 1,618
Threads: 0
Joined: Feb 2010
Location: Coast of Maine
#40
02-11-2023, 07:39 AM
(02-10-2023, 01:05 PM)FrankAtl Wrote: Thanks Gary, I think this will be very helpful. I was having trouble following some of the wire colors using the manual and he shows them very clearly in the video. 

I appreciate all you guys helping me on this. I injured my hand a couple of weeks ago and found out yesterday that I need surgery. The surgery is this coming Monday so it may delay me finishing this for a week or so but I'm hopeful it will work. I just have to make sure I get everything correct since I don't have access to the lathe.

Frank

You're welcome, this vid popped up when I was looking for something totally unrelated. Interesting sometimes what YT thinks I want to watch.

Good luck with your hand and VFD repair!

Gary
I've only had one...in dog beers.

"You can see the stars and still not see the light"
The Eagles: Already Gone
Website Find
Reply
jcredding Offline
Member
Posts: 313
Threads: 5
Joined: Jul 2016
#41
02-11-2023, 06:59 PM
Frank - I have a 3520b so if you need something just let me know. Work’s really crazy right now but I can get out to the shop to answer questions. John
Find
Reply
Thread Modes
Trying to help Arlin, might need a favor from a Powermatic 3520B owner


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.