FS: Delta 12" Disc Sander

[Rick_B]

I have replaced this machine with something a bit bigger so it’s time to move it along to a new home.

It is a Delta 12” disc sander, model 31-122, serial #ET-6191. It has a 1 HP 3 phase 1725 RPM motor that I am currently operating off of a VFD so I can demonstrate it running. I have it wired through the VFD low voltage terminals with a Forward_Off_Reverse drum switch so the disc can spin in both directions. NOTE – The VFD is not included in the asking price but I am willing to discuss including it for a fair price. If you are not familiar with VFD’s I can help you understand and set it up – my VFD requires 220 single phase input but they are available for 110 single phase input. The unit and stand have been completely disassembled, cleaned, painted and reassembled. The motor has also been rebuilt with new bearings. No missing or broken parts. Includes a shop built dust collection hood.

I am asking $395 which includes the machine and stand, mobile base and 14 new discs (2 – 120 grit, 2 – 100 grit ans 10 – 80 grit). I Can help with delivery within a reasonable distance of Winston Salem, NC.

Thanks for looking

   

   

   

   

   

[Arlin Eastman]

That would work great for segmented turning parts.

[Rick_B]

BTTT - for the weekend crowd

[Rick_B]

Bumping it up - let's get this machine to its new home

Rick

[RonB1957]

Bumping it up - let's get this machine to its new home

Rick

You need to move a few hundred miles closer.

[Rick_B]

You need to move a few hundred miles closer.

A few hundred is workable - 725 - I don't think so