Posts: 1,590
Threads: 0
Joined: Aug 2009
Location: Manassas, VA
(12-10-2023, 05:24 PM)RonB1957 Wrote: Has anyone glued up Bubinga and what glue did you use. I am using a 2 part epoxy at the moment, but am wondering if the usual Titebond or Gorilla wood glue would not work equally as well. I do not need a joint coming apart.
What say you, old wise ones of the wood world?
I have used bubinga quite a bit. I have used both TiteBond and TiteBond III with no problems at all. It's hard and dense but not especially oily or anything that would make gluing difficult.
Posts: 86
Threads: 0
Joined: Jul 2016
i also have glued up a bunch of bubinga - using titebond ii - never had a problem
jc
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
My thoughts would be to rub it down with lacquer thinner, just to be sure.
I have always used Original Titebond
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
I've had equal success and no issues using Titebond, plastic resin glue, and liquid hide glue. Never needed acetone wipe-down (ask me about redheart though....)
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site