#15
Has anyone glued up Bubinga and what glue did you use. I am using a 2 part epoxy at the moment, but am wondering if the usual Titebond or Gorilla wood glue would not work equally as well. I do not need a joint coming apart.
What say you, old wise ones of the wood world?
BontzSawWorks.net
Reply

#16
(12-10-2023, 05:24 PM)RonB1957 Wrote: Has anyone glued up Bubinga and what glue did you use. I am using a 2 part epoxy at the moment, but am wondering if the usual Titebond or Gorilla wood glue would not work equally as well. I do not need a joint coming apart.
What say you, old wise ones of the wood world?

I have used bubinga quite a bit. I have used both TiteBond and TiteBond III with no problems at all. It's hard and dense but not especially oily or anything that would make gluing difficult.
Reply
#17
i also have glued up a bunch of bubinga - using titebond ii - never had a problem
jc
Reply

#18
(12-10-2023, 10:45 PM)jcousins2 Wrote: i also have glued up a bunch of bubinga - using titebond ii - never had a problem
jc

Thank you. As dense as the wood is, I thought I had better ask.
BontzSawWorks.net
Reply
#19
My thoughts would be to rub it down with lacquer thinner, just to be sure.
I have always used Original Titebond
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply

#20
I've used TB II to glue Bubinga to maple after a wipe with acetone.
There is no such thing as too much horsepower, free lunch or spare change ~ anonymous

87% of people say their mental health is good to excellent. The rest are sane enough to know they are lying. ~ anonymous
Reply

#21
Bug 
(12-12-2023, 06:48 AM)Redman Wrote: I've used TB II to glue Bubinga to maple after a wipe with acetone.

Works for me. Speaking of acetone, I'm out. Need to pick more up.
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply

#22
(12-12-2023, 07:23 PM)Stwood_ Wrote: Works for me. Speaking of acetone, I'm out. Need to pick more up.

Take some smelling salts with you when you go.
There is no such thing as too much horsepower, free lunch or spare change ~ anonymous

87% of people say their mental health is good to excellent. The rest are sane enough to know they are lying. ~ anonymous
Reply

#23
Bug 
(12-13-2023, 09:10 AM)Redman Wrote: Take some smelling salts with you when you go.

Gotta do that with lacquer thinner also
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#24
I've had equal success and no issues using Titebond, plastic resin glue, and liquid hide glue. Never needed acetone wipe-down (ask me about redheart though....)
Best,
Aram, always learning

"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery


Web: My woodworking photo site
Reply
Bubinga and glue


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.