Another on-the-fly Joinery project

[C. in Indy]

(Monday AM,  newly unemployed)

"Oh that Magic Feeling; Nowhere to Go"
    -   The Beatles;  You Never Give Me Your Money


A new project is now "in my head".... I'll see if I can make it work.


First cut, with sassafras aromas arising from the shiny vintage Atkins saw:

[attachment=49085]

[Stwood_]

And we're off..................on another fine C. in Indy project

[C. in Indy]

Thanks for the vote of confidence !


"While the rest of them dudes was makin' their bread
Buddy beg your pardon I was losin' mine! "

     - Mountain,  Mississippi Queen


This is a bit of a proof of concept, but with finite material, I'm kind of committed already;  not to rule out a lot of tweaking.
My Dad's military-honors flag could use a new case, so that's what I'm hoping to do.

[attachment=49093]

[attachment=49094]

[C. in Indy]

Working a little closer to a plan.
The flag is carefully wrapped to avoid getting dust on it.


[attachment=49116]

[C. in Indy]

Happy New Year!

I had some time away to clear the head a bit.

Moving forward, trying to execute some details and recover from some setbacks (some moron broke off a corner of the glass triangle...).


The bottom angle joinery was tack-glued pretty good, then buttressed with some cross dowels.   All to be leveled out with a nice skew plane:

[attachment=49281]



For making the upper wood pieces look a bit thicker (and to support and conceal glass-piece borders),  I recovered some off-cuts to glue and look sort of like it was never cut to begin with:

[attachment=49282]



Happy woodworking!

Chris

[bandit571]

Looks good to me!

[C. in Indy]

Thanks!

More stuff these last days:


The laminated sides planed down pretty decent; almost can't see those joints.
As mentioned, a real "OOPS" moment when I stepped on the darn glass.
I pondered a thick lower wood border, then later realized I could style it and lighten it a bit, and still cover the missing glass corner:

[attachment=49292]



I was sort of OK with the joinery shape, but it was a bit "too much" in the Route 66 / southwest style, so I shortened the proud fingers a bit:

[attachment=49293]



At this point I'm cleaning up and looking forward to further finishing, as well as a custom fitment of the glass panel:

[attachment=49294]



Happy New Year!

[Stwood_]

Nice OOPS!! recovery!

[C. in Indy]

Thanks!  



I've been house-bound with the Flu, so I have been able to pretty much wrap the thing.


For the back, I looked and looked for some semi-rigid wood or plywood.  Turns out, on my 2022 guitar build project, I set aside the "kit" mahogany in favor of some nice straight walnut I had.   So now the mahogany back is finally finding a use:

[attachment=49386]


Here it's joined up similar to how it would be joined on a guitar back:

[attachment=49387]


Here's the final assembly.   During the installation of the hallowed flag (dating to my Dad's 2009 funeral), I heard clinking, and I found neatly enclosed in the folds was a pack of bullet casings from the military salute.
For the moment, I have set it on the 2019 wine-cabinet project:


[attachment=49388]
[attachment=49389]


Thanks for watching!