Posts: 12,870
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(04-28-2024, 05:07 PM)bpatters69 Wrote: Yes... hate me but we all have to get lucky.... I found over two sheets of cabinet grade ply. Mix of maple and poplar veneer.... oh and two Polk Speakers which are $185 which may work.....
Yahoo!!!!
I am always surprised what people will toss away.... Snapped a photo to share
Free is your friend! Good deal.
John
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Maybe cutoffs from a cabinet shop someone was hauling home. Never know......
You's be surprised what the larger cabinet shops throw in the dumpster.
Us small guys put them back, and sift through them when you need a smaller size without cutting up a full sheet.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 9,536
Threads: 0
Joined: Jan 2005
Location: Orlando FL
That is a nice assortment of free wood.
I miss having a cabinet shop nearby. I used to root through their off cut throwaways for a lot of nice ply.
Posts: 4,644
Threads: 0
Joined: Jan 2008
find!!! Polk speakers- i hope they work.
i swear I could furnish a 1 bedroom apartment monthly just picking garbage just in a 2 square mile area here. I could probably be a gas powered equipment hoarder,too. crazy what people throw away around here.
when I lived up north, if it was at the road it really was garbage.
Posts: 5,180
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
Good Score!!!
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
Posts: 3,750
Threads: 0
Joined: Dec 2006
Location: SW Pa.
Nice find Free is the bomb...
If it can't kill you it probably ain't no good. Better living through chemicals.
Posts: 304
Threads: 0
Joined: Jul 2007
I used to work near several Federal buildings in the cities. I was always finding bookcase shelves and sides in the dumpsters as offices have been remodled. When I first started, they were solid popular or oak. Nowadays they are more veneered particle board. Well, I probably have 2 to 300 shelves that are solid wood 10" x 34" and 3/4" thick. They do have grooves along one side that rested on pins. I have also recovered quite a few Baltic Birch plywood pieces as well. I tend to use this for my shop projects and some painted ones as well, because they are finished.