Posts: 1,992
Threads: 1
Joined: Aug 2016
07-18-2024, 07:10 AM
(This post was last modified: 07-18-2024, 01:36 PM by Roly.)
(07-17-2024, 10:04 PM)anwalt2 Wrote: Daughter & s-i-l house, new to them.
switches for all lights original to the house are low voltage switches. Lights are standard 1950's - 1960's fixtures on 110-120.
several circuits have more than one fixture illuminated by a low voltage switch. Where is the relay for this situation? one for each fixture? one relay for all on the circuit?
I have never seen lighting wired with low voltage switches. There must have been a reason to this wiring, although it makes no sense to me. Is/was there a logic behind this wiring?
thx for any input
tom
This system was used in the 60's. Suggest Googling GE touch plate system . One relay for each part you want controlled. Their were different companies besides GE making this system. Some had low voltage ac for the relays and some used dc on the relays. The relays were normally mounted in the ceilings but could be anywhere. Some installations had a master control panel in bedroom so you could turn lights on and off from there for the house. A common mounting spot for the relays are outside of the fixture box it is controlling.
High tech for then. Roly
Posts: 10,760
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
It was supposed to be the "wiring of the future"....lol. Never worked out that way.
Ed
Posts: 1,932
Threads: 0
Joined: Feb 2008
(07-18-2024, 03:32 PM)EdL Wrote: It was supposed to be the "wiring of the future"....lol. Never worked out that way.
Ed
Still is! They just didn't have PIR's (passive infrared sensors) or LED lights back then.
Sign at N.E. Vocational School Cabinetmaking Shop 1976, "Free knowledge given daily... Bring your own container"
Posts: 100
Threads: 0
Joined: Aug 2008
(07-17-2024, 10:04 PM)anwalt2 Wrote: Daughter & s-i-l house, new to them.
switches for all lights original to the house are low voltage switches. Lights are standard 1950's - 1960's fixtures on 110-120.
several circuits have more than one fixture illuminated by a low voltage switch. Where is the relay for this situation? one for each fixture? one relay for all on the circuit?
I have never seen lighting wired with low voltage switches. There must have been a reason to this wiring, although it makes no sense to me. Is/was there a logic behind this wiring?
thx for any input
tom
Roly,
thanks for your input. Good to know parts are available.
tom
Posts: 10,760
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
Someplace in the house is a master relay....attic or basement, most likely.
Ed
Posts: 12,596
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Learning for the day for me. Here I am, a child of the 60s, and I've never heard of such a thing.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 755
Threads: 0
Joined: Jan 2007
Location: ATL
07-28-2024, 03:23 PM
(This post was last modified: 07-28-2024, 03:24 PM by Cabinet Monkey.)
There are still a couple of systems that do the same thing today and several others that have landed on the scrap heap of history along with the GE one.
Lutron and Vantage are still doing remote type switching systems with Vantage’s being most like The GE one. Local switches were run to a remote location and it was from there that the power is sent to the load.
Savant and Crestron also have (had) power control systems that were configurable from a remote location.
The issue with ALL of them is that they are not common, require specialized training and or certification, and are expensive.
