08-02-2024, 07:42 PM
i have not posted anything in quite a while - although i'm always reading threads. hoping this inspires others to share their photos and get some energy going.
an entryway cabinet - 43" tall - and i think about 15" x 13"
primary cabinet wood is vertical grain doug fir. branches and handles are steamed madrone burl. petals are holly, flower centers afzelia burl. and secondary drawer wood is mahogany.
the drawer front and door were vacuum pressed - the front cross pieces were laminated
veneers were cut using the double bevel method. however the door was too long for me to swing it around on my scroll saw to do the flowers at the far end - notice the branch that goes all the way across - i split the piece there - worked each half - and then taped the 2 pieces together and cut in the branch - which is about 1/2 way and gave me enough room.
appreciate any comments
jc
an entryway cabinet - 43" tall - and i think about 15" x 13"
primary cabinet wood is vertical grain doug fir. branches and handles are steamed madrone burl. petals are holly, flower centers afzelia burl. and secondary drawer wood is mahogany.
the drawer front and door were vacuum pressed - the front cross pieces were laminated
veneers were cut using the double bevel method. however the door was too long for me to swing it around on my scroll saw to do the flowers at the far end - notice the branch that goes all the way across - i split the piece there - worked each half - and then taped the 2 pieces together and cut in the branch - which is about 1/2 way and gave me enough room.
appreciate any comments
jc
