12-05-2024, 05:50 PM
(This post was last modified: 12-05-2024, 05:51 PM by Splinterz25.)
"Amphitrite's Bowl"
The turned bowl is partly segmented Walnut and the main body is Teak, after turning the rim was hand carved with a scalloped edge, it finished at 15" D x 4" Tall. I added a base that was first turned then cut apart and reassembled and carved to look like waves. I added two Dolphins and three Seahorses carved from highly figured Walnut. The final finish is Deft sanding sealer and a hand buffed Bees wax coat. The pieces final dimension is 15" D x 12" T
The turned bowl is partly segmented Walnut and the main body is Teak, after turning the rim was hand carved with a scalloped edge, it finished at 15" D x 4" Tall. I added a base that was first turned then cut apart and reassembled and carved to look like waves. I added two Dolphins and three Seahorses carved from highly figured Walnut. The final finish is Deft sanding sealer and a hand buffed Bees wax coat. The pieces final dimension is 15" D x 12" T
Jack Of All Master Of None
https://www.facebook.com/serenityartisans/
My 16' Cedar Canoe build http://www.clcboats.com/forum/clcforum/t...28426.html
https://www.facebook.com/serenityartisans/
My 16' Cedar Canoe build http://www.clcboats.com/forum/clcforum/t...28426.html
