12-07-2024, 09:16 AM
(This post was last modified: 12-09-2024, 01:15 PM by Philip1231.)
No Longer Available
Bad Axe 14” Bayonet Precision Carcase Saw Crosscut
An impressive precision carcase saw filed 14 ppi crosscut and equipped with a thin gauge .018” saw plate. This particular custom saw is outfitted with a black oxide saw back, nickel fasteners, and a cherry (or possibly maple) handle. This saw has seen very light hobby use and looks and performs as new. Note: when sighting down the tooth line, there is one tooth that seems to stand out (optically, not physically) my guess is it had more or less aggressive sharpening at the factory. No impact to performance: I just don't want anyone to be surprised. Currently 6-8 week lead time for these from Bad Axe.
$275 plus shipping.
Bad Axe 14” Bayonet Precision Carcase Saw Crosscut
An impressive precision carcase saw filed 14 ppi crosscut and equipped with a thin gauge .018” saw plate. This particular custom saw is outfitted with a black oxide saw back, nickel fasteners, and a cherry (or possibly maple) handle. This saw has seen very light hobby use and looks and performs as new. Note: when sighting down the tooth line, there is one tooth that seems to stand out (optically, not physically) my guess is it had more or less aggressive sharpening at the factory. No impact to performance: I just don't want anyone to be surprised. Currently 6-8 week lead time for these from Bad Axe.
$275 plus shipping.