#32
It's been a while since I've done a major build-along thread. In fact, it's been a while since I've done a major furniture build at all. But that's changing right now. Our current dining room table was built a long time ago by one of my wife's relatives, and while it's something of a family heirloom, it's seen better days. It shakes every time one of the little kids bumps it, and the top is nothing like level. The leaves are all warped and don't stay together anymore.

So I'm building a replacement. My kids hate our current table's apron, and the legs are kind of in the way when we have guests. Also, the current table is just a little too small. The leaves are removable, but I can't remember the last time we needed to shrink the table down. So here were my directives:

1. Trestle-style legs.
2. Solid top, hardwood, no apron
3. Big enough to seat 10 people comfortably (our family is now at 7)

Last week I happened to acquire just enough cherry boards from a friend to build the table. The wood had been exposed to a little too much weather, so I had to cut around a lot of defects, but the price was right.





I was still able to get some pretty wide boards out of this stuff. The chalk line was my friend. (And yes, I treated it all for bugs. Borax is also my friend.)


Actually, there was one beam in the stash that was cedar, not cherry. It had a big wane edge and a lot of sapwood, but it was enough that I was able to rip it in half and edge-glue the pieces to make my central beam.







I wish I could share the scent with you as well as the image. My whole dining room smelled like cedar shavings for hours!


And my favorite game: Find the Glue Line!




Well, there were a couple little gaps in the joint, but nothing too detrimental to overall stability. And it's not like anybody will see it under the table anyway, right?


I spent a good bit of time shaping the feet and stretchers for the trestles.




This was the fun part, though I had to get a little creative in order to work around a couple big defects. I just managed to do it without sacrificing the shape I had in mind.




First make the radius with a drill. I was silly enough to try this with a bit and brace the first time around. My 1 1/2" bit is NOT made for hardwoods. I gave up and used the drill press, and my elbows thank me.




After the drill press and the band saw, it was hand work. Rasps and files for the convex work. A spokeshave (and a file) for the bullnose work getting into the radius. It worked pretty well, overall. I used a spokeshave for the chamfers, except on those tight, convex curves where half-round file was called for.

More progress to come this weekend. Planing down the boards for the top and getting them jointed and edge-glued is going to be... interesting.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot

Tutorials and Build-Alongs at The Literary Workshop
Reply

#33
Looking forward to seeing this happen, Steve...I recently built a tabletop, and if my wife likes it enough, it may grow legs.

Here's a photo showing the clamps I made for the glue-up.



And here's the source for the clamp plans...I modified them to take a 42" panel.
Link

Have fun!

David
Dave Arbuckle was kind enough to create a Sketchup model of my WorkMate benchtop: http://www.arbolloco.com/sketchup/MauleSkinnerBenchtop.skp
Reply

#34
David nice job on the top and thanks for sharing the plans for the clamps.


Steve
Reply
#35
Steve very nice I will be anxious to see and read the build along. I like the trestle leg style tables myself. You do great work and I am sure the results will be outstanding.

Steve
Reply
#36
Looking forward to the build along.

You mentioned you used a drill press and band saw. In that second pic, did you break out a circular saw or you went at it with a handsaw?

How do you apply the borax to treat the boards? This is Mule Team Borax or something like TimBor?

Thanks
Paul
Reply

#37
I did that whole 90" board with the bandsaw. I have good outfeed support, and I can resaw an 8" board on it. My circular saw is just one step up from garbage, so I avoid using it whenever I can.

I used the 20 Mule Team borax. I dissolved it in warm water to a pretty strong solution and then sprayed the boards on all sides and then let them dry. No evidence of active insects thus far.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot

Tutorials and Build-Alongs at The Literary Workshop
Reply

#38
Looking good. Thanks for the post.
Reply
#39
Looks like a great project. I enjoyed my trestle table build - a nice, simple, strong design that will last forever.
True power makes no noise - Albert Schweitzer.       It's obvious he was referring to hand tools
Reply
#40
I'm looking forward to following this thread. I have a block of cedar, and it's oh, so marvelous to plane it. The fragrance and the shavings are sublime.
Still Learning,

Allan Hill
Reply
#41
What will be the length and width of the top for a 10 seater?
Reply
Dining Table Build


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.