#7
I've never used a shaper and traded for a 1-hp import knock-off. It's got a 1/2" threaded shaft but the only cutter heads I can find are 3/4" bore. Can I use a sleeve or adapter to use the 3/4" bore heads?

If so where can I find one?

If not, any leads on 1/2" bore cutters?
"Truth is a highway leading to freedom"  --Kris Kristofferson

Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Reply

#8
You can find 1/2" bore cutters by Grizzly and others. I have found that a lot of 3/4" bore cutters come with an adaptor for 1/2", and you really only need one set.

They have rims that sit on the cutter and fit in the hole. The hole in the adaptor is 1/2". Only issue is that a 1/2" shaft is not as stable (can chatter more) than a 3/4" shaft.
Bob H.
Reply
#9
How about a collet and 1/2" router bits You will find they are far easier on the wallet also
Reply
#10
options abound

Nearly every outlet for shaper knives sells the bushings, the T bushings ( you have to have these) and if your machine is capable of it even a bigger spindle.

Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future  John F. Kennedy 



Reply

#11
Thanks for the links. Looks like what I need.
"Truth is a highway leading to freedom"  --Kris Kristofferson

Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Reply
Shaper with 1/2" shaft -- adapter to use 3/4" bore cutter head?


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.