There is an article in the most recent tools and shops issue from FWW that shows a cabinet for under a work bench. It uses side-hung drawers. I am planning on putting a cabinet under my bench. The main thing holding be back is making sure that the bench will not rack along its length. Ok, the fact that I would have to break my workbench to do this also is holding me back. However, the right cabinet will help with the racking. My previous experience with side hung drawers was in a machinist tool ches I built, and I'm not particularly happy with how they work. OTOH, I now realize part of that was using red oak for the runners.
FWW had an article about a Shaker work bench with a cabinet underneath. I was thinking about making that, but it seems like a lot more work than the more recent cabinet.
I suppose I should just go with full-extension ball bearing slides and be done with it.
FWW had an article about a Shaker work bench with a cabinet underneath. I was thinking about making that, but it seems like a lot more work than the more recent cabinet.
I suppose I should just go with full-extension ball bearing slides and be done with it.