Posts: 63,503
Threads: 3
Joined: Feb 2007
Location: Merryland
Show me a picture, turbines vary.
Posts: 573
Threads: 0
Joined: Jul 2003
I can show you a picture but it will be later next week. Just to note, the brand name is Turbinaire and the company on no longer in business. Like I wrote in the original post, it the black material, I think is foam or some sort of mess that measures in inches 6.5x5x1.
Herb
I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.
Posts: 63,503
Threads: 3
Joined: Feb 2007
Location: Merryland
Is there another filter, more like a mower filter on the other end?? If so, the balck one isn't the inlet. It's just the venting to keep the motor vented. You could probably use any open celled foam that doesn't melt. Normally, they aren't replaced. If you could figure out how big these are, they might work.
Linkydoodle
Posts: 573
Threads: 0
Joined: Jul 2003
Thanks, they are the same on both sides of compressor. The ones you suggested is not wide enough. I will check on their others and could possibly cut them down.
Again, thank you,
Herb
I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.
Posts: 63,503
Threads: 3
Joined: Feb 2007
Location: Merryland
You might google around and find the same unit sold under a different name. You can also find open cell foam and just cut it to fit. I'll betcha a million innerweb bucks that you can go on Ebay or Amazon and find someone selling bulk open cell foam that you can cut to fit.